Hallowell EMC: Hallowell Engineering & Manufacturing Corporation


Create Your Vaccuum/Scavenging Interface System

 First, select one of the following five mounting options:

 

 


000A5631 – Vac/Scav Interface Round Pole Mount Options

Pole Clamps available in sizes:

1” (#25), 1 1/8” (#28), 1 1/4” (#32), 1/2” (#36), 1 3/4” (#40), 2” (#47), and 

2 1/4” (#59)

The flowmeter connection for the Round Pole Mount consists of a 45 degree chrome elbow with a 1/4"ID chrome hose barb, which can be connected to an existing hose or an added  hose made to length with a chosen Vacuum Source connector.


000A5632 – Vac/Scav Interface Square Post Mount Options

Set up to fit a 2" wide by a 1 to 1-1/2" deep square post.

Assemblies can be made to accommodate other size square posts. The flowmeter connection for the Square Post Mount consists of a 45 degree chrome elbow with a 1/4"ID chrome hose barb, which can be connected to an existing hose or an added hose made to length with a chosen Vacuum Source connector.

 


000A5633 – Vac/Scav Interface Ceiling Drop Mount Options           

The flowmeter connection for the Ceiling Drop Mount consists of a 90 degree chrome elbow with the orientation pointing up. This can be connected to an existing hose or an added hose made to length with a chosen Vacuum Source connector.


000A5634 – Vac/Scav Interface Wall Outlet Mount Options

The flowmeter connection for the Wall Outlet Mount will be determined by the outlet gas supply fitting. The unit will have a 2" nipple and a connector attaching straight to the wall plate.

 


000A5762 – Vac/Scav Interface Wall Mount

The flowmeter connection for the Wall Mount consists of a swivel barb, in order to easily orientate in the needed direction. This can be connected to an existing hose or an added hose made to length with a chosen Vacuum Source connector.

 

 

 

 

 

 

 

            

Click here for Vacuum/Scavenging Options

Hallowell EMC
239 West Street
Pittsfield, MA 01201
413-445-4263
Email Us