000A5632 - Vac/Scav Interface Square Post Mount Options      200A2691 1/4" ID White Bulk Hose (VAC)   Match Color with Vacuum Source   200A4018 1/4" ID Purple Bulk Hose (EVAC)      DISS Chemtron Ohmeda Puritan  Schrader VAC                150A4726 Vac, DISS HT & Nipple   150A3079 Vac, Chemtron Male QC   150A3080 Vac, Ohmeda Male QC   150A5662 Vac, Puritan Male QC, HT   150A4705 Vac, Schrader Swivel Male QC   EVAC             150A4108 Evac, DISS HT & Nipple   150A4730 Evac, Chemtron Male QC   150A5661 Evac, Ohmeda  Male QC   150A5663 Evac, Puritan Male QC, HT   No Schrader Evac Option Available

000A5632 - Vac/Scav Interface Square Post Mount Ordering Information

Note: The flowmeter connection for Square Post Mount consists of a 45 degree chrome elbow with a 1/4"ID chrome hose barb, which can be connected to an existing hose or an added hose made to length with a chosen Vacuum Source connector.

Square Post Mount:

The Vac/Scav Interface for Sq. Post Mount Assembly is typically set up to fit a 2" wide by a 1 to 1-1/2" deep square post. Assemblies can be made to accommodate other size square posts. If you have a square post that the standard mount will not fit measure the post width and depth. Provide the dimension information on this order form.

Sq. Post Dimesions: (Only if the standard doesn't apply)

Select Hose Color & Length:

The color hose selected should correspond with the type of Vacuum Source it will be connected to. The selected hose color will then be related with the proper VAC or EVAC connector chosen in the next step.

White
Purple

Length (ft):

Select Vacuum Source connector type:

> This connector will be added to the Vacuum Source hose end. Choose from options on picture source page.

DISS
Chemtron
Ohmeda
Puritan
Schrader
Other

Email:

Each Vac/Scav Interface unit ordered from Hallowell will be supplied with a 2 liter EVAC purple resevoir bag and f/Air Canister. If you require a more specific configuration than we currently offer, please email us.